Please Set Branch for Collection or Delivery

Rolec EVEB0040 32amp IEC EconomyBoost

Part Number : EB09501

Direct from Supplier, Usually dispatched in 3 - 5 days

Socket Type

Socket Amps

£462.15 Ex VAT

£554.58 Inc VAT

Currently unavailable at your selected branch.

Direct from Supplier, Usually dispatched in 3 - 5 days
Direct from Supplier, Usually dispatched in 3 - 5 days

WallPod EV: Economy Boost

WallPod EV: Economy Boost is a simple, low-cost and easy to install mode 3, 16amp or 32amp, EV charging station designed specifically for charging electrc vehicles at home.

This unit has been designed with a built-in time clock that allows the charging of the electric vehicle to automatically commence during off-peak electric rates - but should additional EV charging be required at any time a simple charge boost button is available.

  • ZE Ready 1.2 Tested and Accredited
  • Built-in time clock control
  • Charges automatically at off-peak rates
  • Built-in charge boost button
  • Built-in overload DC sensitive fault current protection
  • J1772 (type 1) and IEC 62196 (type 2) charging

WallPod EV: Economy Boost offers the following features:

  • Easy to install / low maintenance
  • Designed to be permanently located indoors or outdoors
  • Built-in time clock for charging during cheap rate tariff
  • Emergency charge facility
  • Emergency charge boost facility
  • Available in both 16amp (3.6kW) or 32amp (7.2kW)
  • Mode 3 IEC61851-1 compliant communication protocol
  • Built-in LED charging status indicator
  • A built-in 16amp or 32amp RCBO accessible via an IP65 rated access door
  • Full overload and DC sensitive fault current protection
  • 230V AC / 50Hz
  • Multiple supply cable entry points

WallPod EV: Economy Boost product specification:

  • Warm white base unit (other colours available upon request)
  • Green service pods (other colours available upon request)
  • Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
  • Glow wire rating tested to IEC60695-2-13
  • BSI certificated to BS EN 60335-1 for safe use in the home
  • Manufactured in compliance with BS7671 wiring regulations
  • Compliant with IET EV regulations
  • Corrosion resistant
  • UV stabilised
  • BS EN 60529: IP65 category 1 certification (weatherproof)
  • Operating temperature – 30ºC to + 50ºC
  • CE approved J1772 (type 1) charging gun c/w 5m tethered lead
  • CE approved IEC62196 (type 2) charging gun c/w 5m tethered lead
  • CE approved IEC62196 (type 2) charging socket c/w hatch lock

Technical Specifications

Charging Mode Mode 3
EV Type Type 2
kW Output 7.2
Amps 32
IP Rating IP65
Charging Series EconomyBoost
Kerridge Part Number E018356
Manufacturer Part Number EVEB0040

We use cookies to help give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the website. However, you can read our Cookie Policy here.

Accept and Continue